System Specifications - 3M DBI SALA 7241420 Manual Del Usuario

INTERMEDIATE BRACKET SPECIFICATIONS:
Figure 1 Part Number Description
7241412 Intermediate Bracket
E
7241413 Variable Intermediate Bracket
7241414 Variable Mount Angle Intermediate Bracket
7241415 45 Degree Intermediate Bracket

Maximum Entry/Exit Angle: The maximum angle at which the HLL cable can enter or exit each Intermediate Bracket is 15°.
CORNER BRACKET SPECIFICATIONS:
Figure 1 Part Number Description
7241406 90 Wall & OH Internal Mount
F
7241407 90 Wall & OH External Mount
7241408 90 Post internal Mount
7241409 45 Wall & OH Internal Mount
7241410 45 Wall & OH External Mount
7241411 45 Post Internal Mount
7241525 90 Wall External Corner Mount
7241526 90 Wall Internal Corner Mount
7241570 45 Wall Internal/External Corner Mount

Maximum Entry/Exit Angle: The maximum angle at which the HLL cable can enter or exit each Corner Bracket is 15°.
TRAVELER SPECIFICATIONS:
Figure 1 Part Number
7241420
G
7241421

SYSTEM SPECIFICATIONS:

Anchorage Structure supporting the 8mm Permanent Horizontal Lifeline System must be analyzed and verifi ed by the Certifi ed Installer
for the resulting loads based on the system confi guration, energy absorbing component, and number of users.
Capacity 1 Person up to 141 kg (310 lbs) including clothing, tools, etc. per Traveler unless otherwise specifi ed by the documentation
from the Certifi ed Installer or on the System Tag. The Certifi ed Installer documentation will also specify the total number of
users allowed per system.
Operating -50° C - 120° C
Temperature (-58° F - 248° F)
Standards EN 795:2012 Class C, CENTS 16415:2013 Class C, OSHA 1926.502, AS/NZS 1891.2:2001, ANSI Z359.6
1 3M Certifi ed Installer: A person certifi ed by 3M with extensive knowledge, training, and experience in the fall protection and rescue fi eld who is capable of designing,
analyzing, evaluating, and specifying fall protections and rescue systems to the extent required by applicable regional and national standards.
2 ANSI Z359.6, CSA Z259.16: This system meets these design requirements when designed by a professional and is inclusive of a full documentation package as
specifi ed in ANSI Z359.6 or CSA Z259.16.
Table 1 – Specifi cations
Description
Detachable Traveler - No Wheels
Overhead Traveler
Material
316 Stainless Steel
316 Stainless Steel
316 Stainless Steel
316 Stainless Steel
Material
316 Stainless Steel
316 Stainless Steel
316 Stainless Steel
316 Stainless Steel
316 Stainless Steel
316 Stainless Steel
316 Stainless Steel
316 Stainless Steel
316 Stainless Steel
Minimum Breaking
Material Strength kN (lb)
Stainless Steel 22.2 (5000)
Stainless Steel 22.2 (5000)
7
Minimum
Breaking
Strength Cable Tensioning
kN (lb) kN (lb)
38 (8543) 0.8 (180) or 5.0 (1124)
30 (6744) 0.8 (180) or 5.0 (1124)
24 (5400) 0.8 (180) or 5.0 (1124)
24 (5400) 0.8 (180) or 5.0 (1124)
Minimum
Breaking
Strength Cable Tensioning
kN (lb) kN (lb)
38 (8540) 0.8 (180) or 5 (1125)
38 (8540) 0.8 (180) or 5 (1125)
22.2 (5000) 0.8 (180)
38 (8540) 0.8 (180) or 5 (1125)
38 (8540) 0.8 (180) or 5 (1125)
22.2 (5000) 0.8 (180)
38 (8540) 0.8 (180) or 5 (1125)
38 (8540) 0.8 (180) or 5 (1125)
38 (8540) 0.8 (180) or 5 (1125)
Capacity
1 Person up to 141 kg (310 lbs)
including clothing, tools, etc.
per Traveler
1 Person up to 141 kg (310 lbs)
including clothing, tools, etc.
per Traveler
, and CSA Z259.16
2
1
2