Appendix - SICK C2000 Manual Del Usuario

Chapter 11
8008684/YJC8/2015-03-30
2 8 6
8 008 684/RI57/2007-11-28

Appendix

11-9: Dimensional drawings and mechanical dimensions of M 2000 A/P,
RES/EDM, swivel mount
a = Clamp 180°, pivoted (mounting kit 2)
s = Socket M 12 x 1 (standard)
d = Sliding nut slot for side mounting
f = M 8 hexagon bolt to DIN 933 with washer to DIN 9021
(not supplied)
g = Offset center of emitting aperture
h = Alignment
S = Sender
11-10 Dimensional drawings and mechanical dimensions of corner mirror
for M 2000 A/P
a = Rating plate on rear side
s = Optical axis (= center of exit window)
d = Center of beam f = Center of slot
11-11 Dimensional drawings and mechanical dimensions of M 12 plug
and side bracket for small housing
(sender, receiver mirror-inverted)
a = M 8 hexagon bolt to DIN 933 with washer to DIN 9021
(not supplied)
s = Mounting kit 6
d = Plug connections
f = Cable connector M 12, 8 pole with cascade connecting cable
11-12 Dimensional drawings and mechanical dimensions of side bracket
for large housing (sender, receiver mirror-inverted)
a = Mounting kit 6
s = M 8 hexagon bolt to DIN 933 with washer to DIN 9021
(not supplied)
11-13 Dimensional drawings and mechanical dimensions of connections
for large housing
a = Plug connections
s = Cable connector M 12, 8 pole with cascade connecting cable
d = Cable receptacle, 6 pole + PE with crimp contacts
f = Cable receptacle M 12 with cable
g = Cable receptacle, 11 pole + PE with crimp contacts
h = Cable receptacle, 11 pole + PE with crimp contacts
j = Cable receptacle, 6 pole + PE, screw-type
Multibeam Photoelectric Safety Switch M 2000
j = Plug PG 13.5 to DIN 43651
R = Receiver
© SICK AG • Safety Systems • Germany • All rights reserved
Operating Instructions
Safety Light Curtain C 2000
N = Number of beams
g = Sliding nut slot