Adjusting Quick Release Mechanisms; Fixing, Adjusting And Removing Stabilizers On Children's Bikes - Decathlon B'twin Manual Del Usuario Y Garantía

9. ADJUSTING QUICK RELEASE MECHANISMS

Quick- release mechanisms hold the wheels in place, clamping them to the frame or fork. For the system to work effectively, you need to adjust the adjusting nut until the closing force
on the quick release lever is at least 12 daN (approximately 12 kg). To increase the closing force: turn the adjusting nut clockwise and anticlockwise to decrease.
Comment: if in doubt, ask the advice of a qualified, experienced mechanic.
Adjustment screw
1. Secure the lever at the back.

10. FIXING, ADJUSTING AND REMOVING STABILIZERS ON CHILDREN'S BIKES

The stabilizers must be attached and adjusted as follows:
Btwin stabilizers do not fit the 12» Woony».
Warning: Never attach or re-
move stabilizers by removing
other bike parts (e.g. wheel
nuts).
To ensure the child's safety, it
is essential that you observe
the recommendations for
attaching and adjusting sta-
bilizers (height of wheels in
relation to ground etc.). Never
use the bike with just one sta-
bilizer. Use a bike fitted with
stabilizers on flat ground.
EASY BRAKE RELEASE TYPE QUICK RELEASE
for this type of release, you do not need to adjust the nut opposite the lever
2. Push the lever down by 90°. 3. Secure the lever at the top to block the system and lift the
bicycle to check that the wheel is secure.
8
CLOSED CLOSED
OPEN
OPEN