ABB ProcessMaster Instrucciónes De Puesta En Marcha página 107

Language
Next
Q (Flowrate) Unit
Next
Qmax
Next
Totalizer/Pulse Unit
Next
Operation
Next
CI/FEX300/FEX500-X1
Easy Setup
Deutsch
Edit
Easy Setup
l/s
Edit
Easy Setup
25.000 l/s
Edit
Easy Setup
m³
Edit
Easy Setup
Pulse Mode
Edit
FEX300, FEX500
10. Use to call up the edit mode.
11. Use or to select the required language.
to confirm your selection.
12. Use
13. Use to call up the edit mode.
14. Use or to select the required unit.
15. Use to confirm your selection.
16. Use to call up the edit mode.
17. Use or to set the required flow range end
value.
18. Use to confirm your setting.
19. Use to call up the edit mode.
20. Use or to select the required unit.
21. Use to confirm your selection.
22. Use to call up the edit mode.
23. Use or to select the required operating mode.
• „Pulse Mode" In pulse mode, pulses per unit are output.
The relevant settings are provided in the next menu.
• „Fullscale Frequency": In the frequency mode, a
frequency proportional to the flowrate is output. The
maximum frequency can be configured according to the
flow measurement range.
The factory default for the operating mode is "Pulse Mode".
24. Use to confirm your selection.
Commissioning
EN - 47