Process Display; Symbol Description - ABB ProcessMaster Instrucciónes De Puesta En Marcha

6.3.1

Process display

Fig. 44: Process display (example)
1 Measuring point identifier
2 Current process values
The process display appears on the LC display when the device is switched on. It shows
information about the device and current process values.
The way in which the current process values (2) are shown can be adjusted on the configuration
level.
6.3.1.1 Description of symbols
Symbol
CI/FEX300/FEX500-X1
1
2
Description
Call up information level.
When Autoscroll mode is enabled, a
pages are automatically displayed one after the other.
Call up configuration level.
The device is protected against changes to the parameter settings.
Q Display of the current flowrate
Σ+
Totalizer status in forward direction
Σ- Totalizer status in reverse direction
3 4
3 Symbol indicating button function
4 Symbol indicating "Parameterization
symbol appears here and the operator
FEX300, FEX500
Commissioning
3
protected"
G00756
EN - 39