Tabla de contenido
Publicidad
REAR WINDOW WIPER ARM Removal and
Installation Procedure
1. Open the wiper arm access cap.
1. Open the wiper arm access cap.
2. Remove the washer hose.
2. Remove the washer hose.
3. Remove the nut.
3. Remove the nut.
Installation Notice
Notice : Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to
prevent premature corrosion.
4. Pull the wiper arm off.
4. Pull the wiper arm off.
5. Installation should follow the removal procedure in the reverse order.
5. Installation should follow the removal procedure in the reverse order.
Tightening Torque
11 N•m (97 lb-in)
Publicidad
Tabla de contenido
