Tabla de contenido
Publicidad
WINDSHIELD WASHER RESERVOIR Removal
and Installation Procedure
1. Disconnect the negative battery cable.
1. Disconnect the negative battery cable.
2. Remove the front left wheel. Refer to
2. Remove the front left wheel. Refer to
2. Remove the front left wheel. Refer to
3. Remove the bolts and the screws and the front wheel well splash shield.
3. Remove the bolts and the screws and the front wheel well splash shield.
Installation Notice
Notice : Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to
prevent premature corrosion.
Section 2E, Tires and Wheel.
Section 2E, Tires and Wheel.
Section 2E, Tires and Wheel.
Tightening Torque
2 N•m (18 lb-in)
Publicidad
Tabla de contenido
