Air Bleeding - Daewoo Nubira Manual De Taller

AIR BLEEDING

Notice : Bleed the hydraulic system to remove the air which entered when the pipes were disconnected for repairs. The
clutch/brake fluid in the clutch/brake reservoir must be maintained at the MIN level or higher during air bleeding. Right-hand drive
vehicles use a separate clutch fluid reservoir.
1. Attach a vinyl hose to the bleeder plug. Place the other end of the vinyl tube in a glass container half-filled 1. Attach a vinyl hose to the bleeder plug. Place the other end of the vinyl tube in a glass container half-filled
with brake fluid.
2. Slowly pump the clutch pedal several times. 2. Slowly pump the clutch pedal several times.
3. While you press the clutch pedal, loosen the bleeder screw until the fluid starts to run out. Close the bleeder 3. While you press the clutch pedal, loosen the bleeder screw until the fluid starts to run out. Close the bleeder
screw.
4. Repeat Step 3 until there are no air bubbles in the fluid. 4. Repeat Step 3 until there are no air bubbles in the fluid.
5. Fill the reservoir with clutch fluid up to the MAX level. 5. Fill the reservoir with clutch fluid up to the MAX level.