Tabla de contenido
Publicidad
WINDSHIELD WASHER PUMP Removal
and Installation Procedure
1. Disconnect the negative battery cable.
1. Disconnect the negative battery cable.
2. Remove the front left wheel. Refer to
2. Remove the front left wheel. Refer to
2. Remove the front left wheel. Refer to
3. Remove the bolts and the screws and the front wheel well splash shield
3. Remove the bolts and the screws and the front wheel well splash shield
Installation Notice
Notice : Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to
prevent premature corrosion.
4. Disconnect the electrical connector.
4. Disconnect the electrical connector.
5. Disconnect the washer hose from the washer pump.
5. Disconnect the washer hose from the washer pump.
6. Remove the washer pump.
6. Remove the washer pump.
7. Installation should follow the removal procedure in the reverse order.
7. Installation should follow the removal procedure in the reverse order.
Section 2E, Tires and Wheel.
Section 2E, Tires and Wheel.
Section 2E, Tires and Wheel.
Tightening Torque
2 N•m (18 lb-in)
Publicidad
Tabla de contenido
