Tabla de contenido
Publicidad
FRONT WINDSHIELD WIPER ARM Removal
and Installation Procedure
1. Open the hood.
1. Open the hood.
2. Remove the cap to reveal the wiper arm nut,if necessary
2. Remove the cap to reveal the wiper arm nut,if necessary
3. Remove the nut from the wiper arm.
3. Remove the nut from the wiper arm.
4. Installation Notice
4. Installation Notice
Notice : Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to
prevent premature corrosion.
5. Pull the wiper arm off.
5. Pull the wiper arm off.
6. Installation should follow the removal procedure in the reverse order.
6. Installation should follow the removal procedure in the reverse order.
REPAIR INSTRUCTIONS
ON-VEHICLE SERVICE
Tightening Torque
20 N•m (15 lb-ft)
Publicidad
Tabla de contenido
