Daewoo Nubira Manual De Taller página 1786

DRIVE AXLE SEAL Tools
Required
KM-519 Ring Installer
Removal and Installation Procedure
1. Remove the drive axle from the transaxle. Refer to 1. Remove the drive axle from the transaxle. Refer to 1. Remove the drive axle from the transaxle. Refer to 1. Remove the drive axle from the transaxle. Refer to
2. Remove the drive axle seal by lifting the outer lip of the seal with a pry bar. 2. Remove the drive axle seal by lifting the outer lip of the seal with a pry bar.
Removal Notice
Do not damage the bearing adjusting ring with the pry bar. Do not damage the bearing adjusting ring with the pry bar.
o o
Section 3B, Manual Transaxle Drive Axle Section 3B, Manual Transaxle Drive Axle Section 3B, Manual Transaxle Drive Axle Section 3B, Manual Transaxle Drive Axle
. . . .