WINSHIELD WIPER MOTOR Removal and
Installation Procedure
1. Disconnect the negative battery cable.
1. Disconnect the negative battery cable.
2. Remove the wiper arm assembly.
2. Remove the wiper arm assembly.
3. Remove the cowl vent grill. Refer to
3. Remove the cowl vent grill. Refer to
3. Remove the cowl vent grill. Refer to
4. Remove the bolts and washer that secure the wiper arm linkage to the motor drive shaft.
4. Remove the bolts and washer that secure the wiper arm linkage to the motor drive shaft.
Installation Notice
Section 9R, Body Front End.
Section 9R, Body Front End.
Section 9R, Body Front End.
Tightening Torque
10 N•m (89 lb-in)