Daewoo Nubira Manual De Taller página 1736

The line pressure flow to the 44 port of the safety valve via the 40, 41, 42, 43 ports. The spools of the
clutch valve D, holding valve D pressed to low.
And, the oil which is supplied to the safety valve flow to the 46, 47 ports of the holding valve C via the 45 port.
Lock up clutch
Solenoid valve 2 is ON, line pressure control valve spool compressed, flow to the 131port via 130 port of the torque converter pressure valve.
As a result, the oil pressure behind the converter lockup clutch piston and in the turbine zone is equal. The direction of flow is through the turbine
shaft and through the space behind the piston, to the turbine chamber.
Drive range-Fourth gear; Emergency/Substitute mode
Drive range - Fourth Gear ; Emergency/Substitute Mode
In Drive 4, transaxle drive is via the input shaft to the clutch E. The elements of the transaxle function as follows; noslip converter drive.
The clutch E is engaged to drive the rear planetary gear carrier.
•