Tabla de contenido
Publicidad
38. Compress the snap ring holding the mainshaft and secure it with the snap ring retainer J-36633.
38. Compress the snap ring holding the mainshaft and secure it with the snap ring retainer J-36633.
39. Hold the snap ring open at the base of the input shaft using the snap ring pliers.
39. Hold the snap ring open at the base of the input shaft using the snap ring pliers.
40. Remove the mainshaft assembly and the input shaft assembly from the bearing plate.
40. Remove the mainshaft assembly and the input shaft assembly from the bearing plate.
41. Assembly should follow the disassembly procedure in the reverse order.
41. Assembly should follow the disassembly procedure in the reverse order.
Publicidad
Tabla de contenido
