Tabla de contenido
Publicidad
Drive range - Fourth Gear
In Drive 4, transaxle drive is via the input shaft to the clutch E,C. The elements of the transaxle function as follows; no-slip converter drive.
The clutch E is engaged to drive the rear planetary gear carrier.
•
The rear planetary gear carrier drive the rear ring gear.
•
The rear ring gear carrier drive the differential gear.
•
Control
Clutch E engaged
Solenoid 2 switched OFF. So the line pressure which is supplied from the 12 port of the reduction valve flow to the upper inlet port(34, 35, 36
port)of the clutch valve E. Line pressure connect to the 72 port. As a result, clutch E engaged. Clutch C engaged
EDS 4 is OFF. So oil level is high.
Publicidad
Tabla de contenido
