Step
terminal I.
Does the voltmeter indicate a voltage equal to the specified
value?
Check for an open circuit between wiper switch connector
terminal A7 and wiper relay connector terminal I.
4
Is there an open circuit?
5 Replace the wiper switch.
Is the repair complete?
Repair the open circuit between wiper switch connector terminal A7
6
and wiper relay connector terminal I. Is the repair complete?
1. Turn the ignition ON.
1. Turn the ignition ON.
2. Turn the wiper switch to INT.
2. Turn the wiper switch to INT.
3. Check for pulsing voltage at wiper relay
3. Check for pulsing voltage at wiper relay
connector terminal 53e.
7
4. Does the voltmeter indicate a pulsating voltage
4. Does the voltmeter indicate a pulsating voltage
equal to the specified value?
Using an ohmmeter, check the resistance between ground and
8
the wiper relay connector terminal 31. Is resistance equal to the
specified value?
9 Repair the open ground circuit.
Is the repair complete?
10 Replace the wiper relay.
Is the repair complete?
1. Ignition ON.
1. Ignition ON.
2. Check the voltage at the wiper switch connector
2. Check the voltage at the wiper switch connector
terminal A6.
11
3. Is voltage pulsating at the specified value?
3. Is voltage pulsating at the specified value?
12 Replace the wiper switch.
Is the repair complete?
Repair the open circuit between the wiper switch and the wiper relay.
13
Is the repair complete?
Step
1. Turn the ignition ON.
1. Turn the ignition ON.
1
2. Check the voltage at the wiper motor connector
2. Check the voltage at the wiper motor connector
terminal 5.
Action
Windshield Wipers Do Not Return To Park Position
Action
Value(s)
Yes
-
Go to Step 6
Go to Step 6
-
System OK
-
System OK
11-14 v
Go to Step 11
Go to Step 11
≈ 0 Ω
Go to Step 10
Go to Step 10
-
System OK
-
System OK
11-14 v
Go to Step 12 Go to Step 13
Go to Step 12 Go to Step 13
Go to Step 12 Go to Step 13
Go to Step 12 Go to Step 13
-
System OK
-
System OK
Value(s)
Yes
11-14 v
Go to Step 3
Go to Step 3
No
Go to Step 5
Go to Step 5
-
-
Go to Step 8
Go to Step 8
Go to Step 9
Go to Step 9
-
-
-
-
No
Go to Step 2
Go to Step 2