Publicidad
DIGITAL OUT
(OPTICAL)
DIGITAL: OUT
(COAXIAL):
DIGITAL OUTPUT
CDP-X707ES
'Connecting to an Equipment
WUAtdae Olielitclmiareley4
Since the music signal output through the
digital output jacks retains digital form, you
can avoid deterioration of the signal during
transmission. Connect the unit to an
amplifier equipped with digital input jacks or
a D/A converter.
When using the DIGITAL OUT
(COAXIAL) jack Al
Connect this unit to the DIGITAL IN jack (of
a D/A converter) with the digital connecting
cord VMC-1ES (not supplied).
a) D/A converter
b) Amplifier
c) to an AC outlet
When using the DIGITAL OUT
(OPTICAL) jack E}
Connect this unit to the DIGITAL IN jack (of
an amplifier or a D/A converter) with the
audio optical connecting cord POC-15 (not
supplied).
a) Amplifier
b) to an AC outlet
To connect an audio optical
connecting cord
1 Remove the cap.
2 Plug in firmly.
After making connections
Turn the power on.
Press DIGITAL OUTPUT on the front panel
so that the ON indicator lights up. Now the
signals are output through the DIGITAL
OUT jacks.
Notes when you use the DIGITAL OUT
jacks
* You cannot use the fade-in/fade-out
function.
* You cannot adjust the output level with
the LINE OUT/PHONE LEVEL control (or
LINE OUT LEVEL +/- on the remote
commander).
Publicidad
