Publicidad
Playing ina
Desired Order
To check your program
Press CHECK. The first selection in the
program will be displayed.
Each time you press CHECK, the next
selection in the program will be displayed.
After the last selection, "End" will be
indicated and the display will soon return to
the initial status.
Changing Your Program
You can make the following changes before
starting play.
To erase the last selection, press CLEAR.
Each time you press CLEAR, the last
selection in the program will be erased.
To erase the entire program, press #
once in stop mode; twice during play.
The program is also erased when you turn
off the unit or you press &@ OPEN/CLOSE.
To add a selection to the end of the
program, simply press the numeric button
for that selection. You can add a selection
also during play or pause.
To delete a selection, press CHECK
repeatedly until the unwanted selection is
displayed. Then press CLEAR.
To change the order, press & in stop
mode to erase the program. Then repeat
the programming procedure from the
beginning.
To check the remaining time
Press TIME once to see the remaining time
of the selection being played; twice to see
the total remaining time; once more to
return to the initial display.
About the blank spaces between
selections .
The blank spaces between selections are
automatically set to 1 second. However, if
you program continuous selections on a
disc (for example, when you program
selections 4 and 5 continuously), the blank
space remains as it is on the disc.
If you use the program bank function
You can have the unit memorize the programmed
selections for each disc. (See page 60.)
Publicidad
