Publicidad
Playing from the Desired
Custom Index:
:
There are three ways to play from the
desired custom index.
a) To play from an index to the end
of the disc
1 Press C.INDEX:
"CUSTOM INDEX" appears in the
display.
2 Select the desired custom index
by pressing the desired numeric
button (1 through 10).
Play starts from the selected custom
index. The number of the custom
index goes off from the display when
the unit finishes playing that index.
b) To play from an index to the next
index
1 Press C.INDEX twice.
"CUSTOM INDEX SINGLE" appears
in the display.
2 Select the desired custom index
by pressing the desired numeric
button (1 through 10).
Play starts from the selected custom
index and stops at the beginning of
the next index.
c) To access an index during play
1 Press C.INDEX.
"CUSTOM INDEX" appears in the
display.
2 Press —— or—.
——~: Goes to the next index.
-—: Returns to the preceding index.
(To go further back, use the
numeric buttons.)
To release play using custom
indexes
Press CONTINUE, SHUFFLE, or
PROGRAN. The unit enters the selected
play mode and the music calendar appears
in the display.
Recommended application of custom indexes
The selection numbers on discs of symphonies
or concertos are sometimes not useful for
locating their movements. In this case, you can
assign a custom index to each movement so that
you can locate it easily. When you want to play
only one movement, you can use custom index
single play.
Publicidad
