Descargar Imprimir esta página

Sony CDP-X707ES Manual De Instrucciones página 8

Publicidad

Choosing a Good Location
* Place the unit in a location with adequate
air circulation to prevent internal heat
build up in the unit.
* Do not place the unit on a soft surface
such as a rug that might block the
ventilation holes on the bottom.
* Do not install the unit:
near heat sources such as radiators or
air ducts.
~in a place subject to direct sunlight,
excessive dust, mechanical vibration or
shock.
On moisture condensation
If the unit is brought directly from a cold to a
warm location or is placed in a very damp
room, moisture may condense on the lens
inside the unit. Should this occur, the unit
will not operate. In this case, remove the
disc and leave the unit turned on for about
an hour until the moisture evaporates.
Checking the Supplied
f Not of-t-x-10)
6 (=1-)
Make sure that all supplied accessories are
included with your unit. This manual and
the following items must be included with
your CDP-X707ES. If anything is missing,
contact your Sony dealer.
a) Audio connecting cord (1)
b) Remote commander (1)
c) Sony batteries SUM-3 (NS) (2)
d) Screws (M4) (8)
Do not throw away the carton and the
packing material. They will come in handy
when transporting the unit or shipping it for
servicing.
|
Detaching the Side Panels
After removing the screws, secure the
cabinet with the supplied lock screws (M4 x
8). Do not use the longer screws.
For safety purposes, be sure to first
disconnect the AC power cord from the AC
outlet.

Publicidad

loading