Publicidad
5 Start recording on the cassette deck
and press >.
The selections for side A starts playing.
It is better to start recording on the
cassette deck first to transport the
leader tape before pressing ® on this
unit.
To play the selections for side B
When the selections for side A are played,
the unit enters pause mode. Reverse the
tape, then press > or Il. -
To check your program
See page 42.
To change your program
See page 42.
To check the remaining time
Press TIME once io see the remaining time
of the selection being played; twice to see
the total remaining time; once more to
return to the initial display.
If you have inserted a pause, the display
shows the remaining time until the pause.
The blank spaces between
selections
The blank spaces between selections are
automatically set to 1 second. However, if
you program continuous selections on a
disc (for example, when you program
selections 4 and 5 continuously), the blank
space remains as it is on the disc.
The program is erased in the following cases
¢ when you turn off the power
© when you change the play mode
Publicidad
