DeWalt DCM565 Traducido De Las Instrucciones Originales página 27

Batteries
Cat # V
DC
DCB546 18/54 6.0/2.0
DCB547/G 18/54 9.0/3.0
DCB548 18/54 12.0/4.0
DCB549 18/54 15.0/5.0
DCB181 18
DCB182 18
DCB183/B/G 18
DCB184/B/G 18
DCB185 18
DCB187 18
DCB189 18
DCBP034/G 18
DCBP518/G 18
*Date code 201811475B or later
**Date code 201536 or later
***Battery charge times matrix provided for guidance only; charge times will vary depending on temperature and condition of batteries.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Paul Featherstone
Product Director – Outdoor Products Group
D WALT, UK,
e
270 Bath Road, Slough
Birkshire SL1 4DX
England
25.08.2021
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.

Denotes risk of electric shock.

Denotes risk of fire.
Weight (kg) DCB104
Ah
1.08 60
1.46 75*
1.46 120
2.12 125
1.5 0.35 22
4.0 0.61 60/40**
2.0 0.40 30
5.0 0.62 75/50**
1.3 0.35 22
3.0 0.54 45
4.0 0.54 60
1.7 0.32 27
5.0 0.75 50
WALT.
e
Chargers/Charge Times (Minutes)***
DCB112/ DCB115/
DCB107 DCB113
DCB1102 DCB1104
270 170 140
420 270 220
540 350 300
730 450 380
70 45 35
185 120 100
90 60 50
240 150 120
60 40 30
140 90 70
185 120 100
82 50 40
240 150 120
GENERAL POWER TOOL SAFETY WARNINGS

WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b ) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c ) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2) Electrical Safety
a ) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b ) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is earthed or grounded.
c ) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
d ) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e ) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
DCB116 DCB117 DCB118 DCB132 DCB119
90 80 40
135* 110* 60
180 150 80
230 170 90
22 22 22
60 60/45** 60/40** 60/40**
30 30 30
75 75/60** 75/50** 75/50**
22 22 22
45 45 45
60 60 60
27 27 27
75 60 50
FOR FUTURE REFERENCE
EnGLIsh
60 90 X
75* 135* X
120 180 X
125 230 X
22 22 45
60 120
30 30 60
75 150
22 22 40
45 45 90
60 60 120
27 27 50
50 75 150
27