Publicidad
Idiomas disponibles
Idiomas disponibles
EN
1. End View Of Work Angle.
2. Side View Of Electrode Angle.
Fillet Weld
1. End View Of Work Angle.
2. Side View Of Electrode Angle.
After learning to start and hold an arc, practice running beads of weld metal on flat
plates using a full electrode.
Hold the electrode nearly perpendicular to the work, although tilting it ahead (in the direction of
travel) will be helpful.
To produce the best results, hold a short arc, travel at a uniform speed, and feed the electrode
downward at a constant rate as it melts.
10.5.
Poor Weld Bead Characteristics
1. Large Spatter Deposits.
2. Rough, Uneven Bead.
3. Slight Crater During Welding.
4. Bad Overlap.
5. Poor Penetration.
Publicidad
