Publicidad
Idiomas disponibles
Idiomas disponibles
•
Duty Cycle is the ratio of the uninterrupted on-load duration to 10 minutes.
•
If machine overheats, thermostat(s) opens, output stops, and cooling fan still runs. Wait
fifteen minutes for machine to cool. Reduce amperage or duty cycle before welding again.
•
NOTICE - Exceeding duty cycle can damage machine or electrode holder and void warranty.
1. General description
The user manual is designed to assist in the safe and trouble-free use of the device. The product is
designed and manufactured in accordance with strict technical guidelines, using state-of-the-art
technologies and components. Additionally, it is produced in compliance with the most stringent
quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE THOROUGHLY
To increase the product life of the device and to ensure trouble-free operation, use it in
accordance with this user manual and regularly perform maintenance tasks. The technical data
and specifications in this user manual are up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device is designed to reduce noise emission
risks to a minimum, taking into account technological progress and noise reduction opportunities.
Legend
The operation manual must be read carefully.
The product must be recycled.
Satisfies requirements of applicable safety standards.
EN
Continuous Welding
READ AND UNDERSTOOD THIS USER MANUAL.
Publicidad
