Publicidad
Idiomas disponibles
Idiomas disponibles
EN
After set up machine, turn on the power sourse, and then proceed parameter installation.
1. Press the PROCESS button to choose MMA welding method.
2. Press and release ADJUST button to choose the WELDING CURRENT, the LED A - CURRENT will
turn on. And then, turn it to increase or decrease to suit with electrode size to be used.
3. Welding current and welding voltage will be displayed on the screens meter (3) and (4)
respectively.
5.3.1. Set up Arc-Start function (Arc starting only)
A-S (Arc start function) - Automatically compensates more current from 20-50% compared to the
initial adjustable current. Start the arc easily, quickly and stably. Especially in difficult conditions
such as humid electrodes, uneven surface welding or imperfect welding surfaces, or when using
difficult welding rods.
Press and release ADJUST button to choose Arc start function, in the screen meter (6) will display
A-S (ARC START) and the LED A - Welding current will turn on. Turn it to adjust the percentage of
current compensates to initial current.
Notice: Please attention when using Arc start function on thin material to avoid damage surface
of the workpiece.
5.3.1. Set up Arc-Force function
A-F (Arc Force) - Automatically compensates more current from 20-50% compared to the initial
preset current. This greatly aids in stabilizing the arc, preventing the arc from stopping during
welding and preventing sticking electrode to work piece.
Publicidad
