Publicidad
Idiomas disponibles
Idiomas disponibles
10.6.
Good Weld Bead Characteristics
1. Fine Spatter
2.Uniform Bead
3. Moderate Crater During Welding: Weld a new bead or layer for each 1/8 in. (3.2 mm) thickness
in metals being welded.
4. No Overlap
5. Good Penetration into Base Metal
10.7.
Conditions That Affect Weld Bead Shape
Angle too small
Electrode
angle
Arc length
Too short
Travel speed
Low
Weld bead shape is affected by electrode angle, arc length, travel speed, and thickness of base
metal.
EN
Correct angle
Drag
Normal
Normal
Angle too large
Spatter
Too long
Fast
Publicidad
