Publicidad
Idiomas disponibles
Idiomas disponibles
• secure electric cables, gas or installation pipes covered with flammable insulation against welding
spatter if they are within the range of work that constitutes a fire hazard;
• check that the planned work will not be carried out in rooms that were painted using flammable
substances or where other flammable substances were used on the day of planned work.
Sparks may cause a fire
Sparks produced by welding can cause fires, explosions and burns on exposed skin. During welding, it
is necessary to wear welding gloves and protective clothing. Remove or secure any flammable
materials and substances from the place of work. Do not weld sealed containers or tanks in which
flammable liquids were stored. Such containers or tanks must be rinsed before welding to remove
flammable liquids. Do not weld in the vicinity of flammable gas, vapours or liquids. Fire equipment
(blankets, dry powder extinguisher or extinguishing foam) must be placed near the workplace in an
easily visible and reachable place.
A cylinder may explode
Use only approved gas cylinders and a properly working reducer. The cylinder should be transported,
stored and placed in a vertical position. Protect the cylinders from heat sources, tipping over and
mechanical damage. Maintain all gas installation elements: cylinder, hose, fittings, reducer in good
condition.
Welded materials can cause burns
Never touch the welded components with parts of your body without protection. When touching and
moving welded material, always use welding gloves and tongs.
ATTENTION! Despite the safe design of the device and its protective features, and
despite the use of additional elements protecting the operator, there is still a slight
risk of accident or injury when using the device. Stay alert and use common sense
when using the device.
EN
Publicidad
