Publicidad
Idiomas disponibles
Idiomas disponibles
EN
9. PROCESS - Selecting welding method button (MMA/ LIFT ARC TIG/ MIG-MAG/ SS-FCAW).
10. PURGE - Gas check button for MIG/MAG/SS-FCAW method, or turn ON/OF gas valse for LIFT -
TIG function.
11. MIG gun receptacle.
12. Power switch.
13. Single-Phase, power cable and plug.
14. Cooling fan.
15. Earth stub.
16. Gas hose.
3.2.
Setup Guide and Component Identification
3.2.1. Manual metal arc (MMA) welding method
1. Connecting electrode holder to positive (+) welding output terminal.
2. Connecting Mass clamp to negative (-) welding output terminal and clamp to the workpiece as
close as to the welding areas.
Different types of electrodes need different polarity connection. See Electrode and Amperage
Selection Chart.
Publicidad
