Publicidad
Idiomas disponibles
Idiomas disponibles
Improve arc quality - INDUCTANCE, Press and release ADJUST button until just have the LED
- INDUCTANCE turn on. The inductance can be adjusted. Inductance initialization value is 0,
adjust range + 2.
Increase from -2 to 2: The Arc will decrease.
•
•
Decrease from 2 to -2: The Arc will increase.
5.3.
Install the parameter for MMA method
Notice: Need to set up the machine follow the right instruction at 3.2.1 in Owner's. Set up the
machine for MMA method.
After set up machine, turn on the power source, and then proceed parameter installation.
1. Press the PROCESS button to choose MMA welding method.
2. Press and release ADJUST button to choose the WELDING CURRENT, the LED A - CURRENT will
turn on. And then, turn it to increase or decrease to suit with electrode size to be used.
3. Welding current and welding voltage will be displayed on the screens meter (3) and (4)
respectively.
EN
Publicidad
