Bodum BISTRO Instrucciones De Uso página 27

UNUSUAL INFORMATION IS SHOWN ON THE SCREEN.
H:HH (after
starting the
program):
E:E0 (after starting
the program):
AFTER USING THE
BREAD MAKER
CARE AND
CLEANING
STORAGE
The temperature within
the heating compartment
is too high.
The temperature probe
failed.
When not in use or before cleaning, always disconnect the appliance
from the mains supply and allow the unit to cool completely.
Periodically check all parts before reassembly.
CAUTION: Never immerse the ever immerse the unit in water or any
other liquid.
Always clean the product immediately after each use.
Wipe the outside of the appliance with a moist cloth and dry before
storing.
Do not use abrasive cleaners, steel wool or abrasive materials or
cleansers.
Wash the baking pan, kneading paddle, measuring cup and spoon in
hot, soapy water, rinse and dry thoroughly.
If the kneading paddle is difficult to remove from the bread pan,
pour in sufficient warm soapy water to cover the paddle and leave to
soak for 10 – 15 minutes. This will loosen the paddle.
To clean the baking chamber, remove any bread crumbs by tipping
them out or wiping them away with a slightly damp cloth or clean
pastry brush.
If food residue burns onto the heating element, allow to cool com-
pletely then wipe away with a damp cloth.
Store the Bread Maker with the power cable loosely coiled. Never
wrap it tightly around the bread maker.
Before reusing or storing, ensure all areas of the Bread Maker are
completely dry.
NOTICE: Never use rough scouring pads or abrasive cleansers on
any plastic or metal parts as the surface may be damaged.
When not in use store your appliance and all its accessories and
instruction manual in a safe and dry place.
Immediately touch the START/STOP button to
stop the program, and unplug the appliance.
Then open the lid and let the Bread Maker cool
down completely before using it again.
Send the appliance to an authorized service
centre for repair.
27
EN