Tunturi C80 Manual Del Usuario página 22

English
Expert
70-80% of maximum heart rate
Suitable for the fittest of persons who are used to long-endurance
workouts.
Use
Adjusting the support feet
The equipment is equipped with 4 support feet. If the equipment is
not stable, the support feet can be adjusted.
- Turn the support feet as required to put the equipment in a stable
position.
- Tighten the locknuts to lock the support feet.
‼ NOTE
• The machine is the most stable when all support feet are turned
fully in. Therefore start to level the machine by turning all
support feet fully in, before turning out the required support
feet to stable the machine.
⚠ WARNING
• To prevent damages on your floor, make sure "U shape holder"
can't touch the floor when using the trainer. (fig. E-2)
Gain height for the "U shape slider" by adjusting the "Adjusting
cushion" if needed. ( See Assembly step D-1C-A)
Adjusting the pedal position
The both pedals can be adjusted according to the height and the
exercise position of the user.
- Loosen the 2 pedal fixing knobs.
- Move the pedal to the required position.
- Tighten the pedal fixing knobs.
‼ NOTE
• Make sure the both pedals are fitted into similar positions
always.
Adjusting the console
The console can be adjusted according to the height and the exercise
position of the user.
- Loosen the console adjustment knob.
- Move the console to the required position.
- Tighten the console adjustment knob.
Power supply (Fig. E-1)
The trainer is powered by an external power supply. Refer to the
illustration to locate the trainer's power input.
‼ NOTE
• Connect the power supply with the trainer before connecting it
to the wall outlet.
• Always remove power cord when machine is not in use.
Console (fig F)
1. Display
2. Tablet/ book support
3. Buttons
⚠ CAUTION
• Keep the console away from direct sunlight.
• Dry the surface of the console when it is covered with drops of
sweat.
• Do not lean on the console.
• Only touch the display with the tip of your finger. Make sure that
your nails or sharp objects do not touch the display.
‼ NOTE
• The console switches to standby mode when the equipment is
not used for 4 minutes. If the console is in standby mode, the
display shows the room temperature
Explanation of buttons
BACK/ STOP
- Move back to previous window
- Stop the active training
QUICK START
- Start training without present settings.
All workout information will count up.
MAIN MENU
- It will go back to main menu.
- During training, sets console in "end your workout" mode.
USER SETTING
- Press this button to enter User/Setting mode screen
- This button is of no use during workout
MODE/ ENTER
Turn functions
- Choose workout mode in main menu
2 2