Watt Constant; Preset Programme - Tunturi C80 Manual Del Usuario

English
- A message of "No Heart Rate" is shown if the user's heart rate is
not detected during workout.
To stop your workout see: "End your workout"
Manual
- Turn the jog wheel and select
"Manual"
- Press the jog wheel to confirm and enter the Setting screen (Fig.
F-09).
- Turn jog wheel to select item
- Press the jog wheel button for confirmation and continue the range
setting at the right.
- Turn jog wheel to change setting ranges
- Press the jog wheel button to confirm and enter the Workout
screen. (Fig. F-03)
The X axis denote time in minutes between 0~30. It is updated once
every 15 minutes during workout
- During workout, press the jog wheel button to switch the Y-axis
between Nm- bpm.
- The bar chart denotes torque value Nm. Rotate the jog wheel to
adjust the Nm value.
- The white dot line shows current position, which moves rightward
as workout time increases. The workout screen could show 5-hour
data at most.
To stop your workout see: "End your workout"

Watt constant

- Turn the jog wheel and select
"Watt Constant"
- Press the jog wheel to confirm and enter the Setting screen
(Fig.F-10).
- Turn the jog wheel to adjust target Watt value.
- Press the jog wheel to confirm and enter the Setting screen (2) (Fig.
F-11)
- Turn jog wheel to select item
- Press the jog wheel button for confirmation and continue the range
setting at the right.
- Turn jog wheel to change setting ranges
- Press the jog wheel button to confirm and enter the Workout
screen (Fig. F-12)
The X-axis unit is shown according to the selection of Energy/Time/
Distance in Set screen.
Energy Unit:
Time Unit:
Distance Unit: km in metric
- During workout, press the jog wheel button to switch the Y-axis
between Nm - bpm
- The bar chart denotes the Watt value. Rotate the jog wheel to
adjust the Watt value
- The white dot line shows current position, which moves rightward
as calorie /time/distance increases
- The orange curve shows the user's actual heart rate, which varies as
the heart rate frequency goes up and down
kcal
min
mile in Imperial
- Console programming: Assist the user to achieve the target
according to its target Watt value input during workout. When
actual Watt value > target value, the system would decrease Watt
value; while increases Watt value when actual Watt rate < target
value.
To stop your workout see: "End your workout"
T-Ride
- Turn the jog wheel and select
"T-ride"
- Press the jog wheel to confirm and enter the Setting screen (Fig
F-13).
- Turn the jog wheel to select between: Top and Down - Trail - Easy
Ride - Marathon - Short Loop
- Press the jog wheel to confirm and enter the Setting screen (2)
(Fig. F-14)
- Set up the Startup point of Workout: rotate the jog wheel button
to adjust the left white dot line, press the jog wheel button for
confirmation.
- Set up the Ending point of Workout: rotate the jog wheel button
to adjust the right white dot line, press the jog wheel button for
confirmation then enter the Workout screen. (Fig. F-15)
The X-axis is shown as distance unit, km in metric and mile in Imperial
- During workout, press the jog wheel button to switch the Y-axis
between m-bpm in metric, ft-bpm in imperial
- The white dot line shows current position, which moves rightward
as distance increases
- In the right of the screen is the gear shift from 1~8,
Turn the jog wheel button to switch
- The white icon + 0°in the left bottom of the screen shows the
incline level and it varies with the Profile incline level change.
- The Last Session screen shows workout data. Press the jog wheel
button to return to Main menu
To stop your workout see: "End your workout"

Preset Programme

- Turn the jog wheel and select
"Preset Programs"
- Press the jog wheel to confirm and enter the Setting screen (Fig.
F-16).
- Turn the jog wheel to select between:
- Watt control: Rolling Hills - Hill Climb - Cross Country - Stamina -
Power Interval items and,
Heart Rate Control: Fat burner 1 - Fat burner 2 - Cardio Strength -
Cardio Climb - Cardio Interval
- Press the jog wheel to confirm and enter the Setting screen (2) (Fig.
F-17)
- Turn jog wheel to select item
- Press the jog wheel button for confirmation and continue the range
setting at the right.
- Turn jog wheel to change setting ranges
- Press the jog wheel button to confirm and enter the Workout
screen. (Fig F-18)
- Turn jog wheel to select item
- Press the jog wheel button for confirmation and continue the range
setting at the right.
2 4