Scale; Measuring Weight - Philips Patient Telemonitoring Set Instrucciones De Uso

Device Usage

Scale

Two types of scale are available:
Notes
If you have been given a Standard Scale and are having balance problems
standing on it, contact your healthcare provider. A Standard Scale can be
converted to a Steady Scale.
If you need the support of a walker, refer to the following section
Measuring Weight with a Walker.
Measuring
Procedures for measuring your weight on both the Standard and Steady
Weight
Scales are as follows. Choose the procedure for your type of Scale.
Standard Scale
Step 1.
Step 2.
Notes You will not hear the voice prompt if the volume is set to 0.
After several seconds, the Scale will say "Please step off the Scale".
Step 3.
About 5 seconds after you step off the Scale, the Scale will say your final
weight (unless the volume is set to 0).
The Scale then turns off by itself.
Notes If the batteries in the Scale are weak, the Scale's display will alternately
flash Lo and batt and announce "Please replace the scale batteries" for
3 measurements and then the voice turns off.
If this message appears on the display or the voice is silent even though it
is not set to 0, change the Scale's batteries following the Replacing
Batteries procedure on page 3-4.
2-20
Philips Telemonitoring Set
Standard Scale for people who can get on and off without help
Steady Scale with a column and grab bar to help keep your balance.
Step on the Scale and stand on it without holding onto anything.
– Stand as much in the center of the platform as possible.
– Try not to step on the corners; you might damage the Scale.
The Scale will say, "Please stand still". Do not move.
Walking "-" will show on the display during the measurement.
Step off the Scale.