Glucose Meter Cable - Philips Patient Telemonitoring Set Instrucciones De Uso

TeleStation
Glucose
Meter
Turn the Glucose Meter on.
Step 5.
The Glucose Meter will automatically send the results to the Telestation
and then turn off. When the Glucose Meter turns off:
Disconnect your meter from the cable. You can leave the cable
Step 6.
connected to the TeleStation.
The PTS System relies on the date and time set in the Glucose Meter as
the actual date and time of the glucose reading. This gives the clinician
the most accurate date and time of measurement. Therefore it is important
for the Glucose Meter's date and time to be set correctly.
Changing Glucose Meter Time and Date
If it is necessary to correct the date or time in your Glucose Meter, follow
the steps below to ensure that the date and time of your glucose
measurements are accurate when you transmit them via the TeleStation.
Connect your Glucose Meter to the TeleStation and transmit the
Step 1.
results as described above.
Clear the Glucose Meter's memory of all readings.
Step 2.
Change the time and/or date on your Glucose Meter following the
Step 3.
procedure described for the unit.
Device Usage
Glucose Meter
Cable
Philips Telemonitoring Set
2-43