Philips Patient Telemonitoring Set Instrucciones De Uso página 52

Device Usage
When the inflation is complete, the deflation starts automatically and the
heart icon
Once the pulse is detected, the symbol flashes with each pulse beat.
Note
If an appropriate pressure is not obtained, the device automatically stars
to inflate again.
When the measurement is complete, the systolic and diastolic pressure
reading and pulse rate are displayed. The cuff will then deflate and the
BP Monitor automatically shuts off after 45 seconds, or you can turn it
off by pressing the START/STOP button.
Note
If an error message was displayed, you stopped the reading, or you feel
that the reading may be incorrect, take your blood pressure again.
If this happens a second time, contact your healthcare provider.
Step 6.
Step 7.
Note Refer to the Maintenance section for proper storage of your BP
Monitor.
2-36
Philips Telemonitoring Set
blinks, indicating that the measurement is in progress.
Remove the cuff.
Store the BP Monitor within 20 feet of the Home Hub/
TeleStation so it can send your readings to the Home Hub/
TeleStation.