Cleaning Devices - Philips Patient Telemonitoring Set Instrucciones De Uso

Cleaning Devices

Cleaning Devices
Telemonitoring devices should be cleaned only when necessary. The
following procedure should be followed to clean the devices.
Note Body fluids, such as blood or mucus, should be promptly removed using
a cloth dampened with plain tap water (no soap).
Caution
Avoid spilling liquids on the devices.
Do not immerse devices in liquids to clean.
Do not use alcohol. harsh chemicals, caustic, or abrasive cleaning
agents to clean devices.
Step 1.
Step 2.
Step 3.
Note When cleaning the Pules Oximeter:
Step 4.
Step 5.
3-2
Maintenance
Unplug the Home Hub/TeleStation from power and phone lines.
Remove batteries from the measurement devices following
procedures given in the Replacing Batteries section.
Clean all exposed device surfaces with a dry, soft cloth.
– Open the Finger-clip sensor and carefully wipe its inside surfaces
with a cloth dampened with a mild detergent.
– Allow the sensor to dry thoroughly before using.
Plug the Home Hub/TeleStation back into power and phone
lines.
Reinstall batteries into the measurement devices following
procedures given in the Replacing Batteries section.