Philips Patient Telemonitoring Set Instrucciones De Uso página 37

Steady Scale
Step 1.
Step 2.
Notes You will not hear the voice prompt if the volume is set to 0.
After several seconds, the Scale will say "Please step off the Scale",
(unless the volume is set to 0) and the Step Off light will come on.
Step 3.
About 5 seconds after you step off the Scale, the Scale will say (unless
the volume is set to 0) and display your final weight.
The Scale then turns off by itself.
Notes If the batteries in the Scale are weak, the Scale's Stand Still light will
flash instead of remaining on.
If this message appears on the display or the voice is silent even though it
is not set to 0, change the Scale's batteries following the Replacing
Batteries procedure on page 3-4.
Step on the Scale and stand on it holding the
grab bars as shown opposite. You can continue
holding the grab bars while taking your weight.
– Stand as much in the center of the platform
as possible.
– Try not to step on the corners; you might
damage the Scale.
The Scale will say, "Please stand still",
and the Stand Still light will come on.
Do not move.
Changing weight values will show on the
display.
The final weight displayed is the correct weight.
Step off the Scale.
Device Usage
Philips Telemonitoring Set
2-21