Procedure For M3815B Blood Pressure Monitor - Philips Patient Telemonitoring Set Instrucciones De Uso

Device Usage

Procedure for M3815B Blood Pressure Monitor

The following table describes symbols
that you may see on the M3815B BP
Monitor display during the measurement.
.
Symbol
If there is still a problem, consult the Troubleshooting section for
corrective actions.
If this does not resolve the problem, call your healthcare provider.
2-34
Philips Telemonitoring Set
Meaning
Indicator when measurement is in progress.
It blinks when detecting the pulse
M
Previous measurements stored in Memory
Battery power full indicator
Battery power low indicator. If it blinks, the batteries
should be replaced
There was a problem with the measurement, such as:
– Unstable blood pressure due to excessive body
movement.
– Pulse not detected correctly.
– Systolic and diastolic values within 10 mmHG
of each other.
Take your blood pressure again, being sure to remain
very still during the measurement.
Cuff is not fastened correctly.
– Refasten the cuff
– Take your blood pressure again.