Philips Patient Telemonitoring Set Instrucciones De Uso página 39

Steady Scale
Step 1.
side of the Scale platform as shown opposite.
Step 2.
Step 3.
Note You must remove your hands from your walker for the Scale to take your
true weight.
Step 4.
Notes You will not hear the voice prompt if the volume is set to 0.
After several seconds, the Scale will say "Please step off the Scale",
(unless the volume is set to 0) and the Step Off light will come on.
Step 5.
Step 6.
About 5 seconds after you step off the Scale, the Scale will say (unless
the volume is set to 0) and display your final weight.
The Scale then turns off by itself.
Place the walker so its legs are on either
Step on the Scale and stand using the walker arms for balance.
– Stand as much in the center of the
platform as possible.
– Try not to step on the corners; you might
damage the Scale.
Move your hands from the walker arms
to the Scale's grab bars. You can continue
to use the Scale's grab bars for balance
while you are taking your weight.
The Scale will say, "Please stand still" and the Stand Still light
will come on.
Do not move.
Changing weight values will show on the display. The final weight
displayed is the correct weight.
Move your hands from Scale's grab bars to the walker arms.
Step off the Scale.
Device Usage
Philips Telemonitoring Set
2-23