12. Maintenance; Cleaning; Spare And Wearing Parts; Maintenance Interval - Bosch ACS 810 Manual Original

Ocultar thumbs Ver también para ACS 810:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 97
en
60 | ACS 810 | Maintenance

12. Maintenance

!
Work on electrical equipment is only to be per-
formed by persons with sufficient knowledge and
experience of electrical systems!
12.1

Cleaning

!
Do not use abrasive cleaning agents and coarse
workshop cloths!
The housing and the LCD are only to be cleaned us-
ing a soft cloth and neutral cleaning agents.
12.2

Spare and wearing parts

Description
Combo filter
Vacuum pump oil
Roll of paper for printer
Service hose 2.5 m (HP)
Service hose 5 m (HP)
Service hose 2.5 m (LP)
Service hose 5 m (LP)
Quick-release coupling (HP)
Quick-release coupling (LP)
Used oil bottle
Fresh oil bottle
Adapter set 2.5 m - 5 m
Adapter for connection to an exter-
nal refrigerant cylinder 1/4" SAE
Adapter for connection to an exter-
nal refrigerant cylinder W21.8-14 x
1/4" FL (EU standard)
12.3

Maintenance interval

Description
Vacuum pump oil replacement and
system leak test
Replacement of combo filter
!
Never perform any maintenance work which is not
expressly recommended in this Section.
!
Contact customer service if components have to be
replaced other than in the course of maintenance
work.
|
S P00 D00 006
2019-02-26
12.4
i
i
12.5
!
12.5.1
Order number
1. Pull the quick release coupling downwards slightly
2. Pull the fresh oil bottle downwards.
SP00100001
SP00100086
SP00100087
SP00100029
SP00100035
SP00100030
SP00100036
SP00100083
SP00100082
SP00100113
SP00100112
SP00100075
SP00100019
SP00100080
Fig. 5:
12.5.2
1. Pull the quick release coupling downwards slightly
2. Pull the used oil bottle downwards.
Period
see display (30 h)
see display (150 kg)
Fig. 6:
Calibrating internal refrigerant cylin-
der scales
The internal refrigerant cylinder is calibrated at the
factory.
Contact customer service for calibration of the inter-
nal refrigerant cylinder.
Removing the fresh and used oil
bottles
Do not exert excessive force when removing or in-
serting the fresh oil and used oil bottles.

Removing the fresh oil bottle

1.
2.
Removing the fresh oil bottle

Removing the used oil bottle

1.
2.
Removing the used oil bottle
Robert Bosch GmbH

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Acs 611Acs 611-ukAcs 611-gAcs 611-icAcs 511Acs 652

Tabla de contenido