Software Update; Firmware; Vehicle Database; Replacing Printer Paper - Bosch ACS 810 Manual Original

12.6

Software update

12.6.1

Firmware

i
The firmware (software) can be updated by way of a
PS2 stick. Further information can be obtained from
customer service.
12.6.2

Vehicle database

i
The vehicle database can be updated annually by
way of a PS2 stick. Further information can be ob-
tained from customer service.
!
Do not switch off ACS 810 during update process.
!
Observe the ACS 810 menu prompting.
1. Call up start screen.
2. Press <3> and <Flush> simultaneously and release.
 The message
ENTER CODE 0000
2222
and confirm with E.
3. Enter code
4. Select "DATABASE UPDATE" with o u and confirm
with E.
 INSERT THE KEY
is displayed.
5. Remove plastic cover (input PS2 stick) between
menu key and stop key.
6. Insert PS2 stick.
7. Activate or deactivate with o u and confirm with E.
 The update is performed.
"
Data base is updated.
i
Return with <Stop>.
Robert Bosch GmbH
12.7
!
Avoid excessive force so as not to damage the
printer cover.
1. Open the printer cover.
2. Remove old printer paper roll.
3. Fit new printer paper roll.
is displayed.
Fig. 7:
1 Printer paper
4. Close the printer cover.
i
To cut the printer paper correctly, pull the paper
towards the tear bar from one side to another.
Maintenance | ACS 810 | 61

Replacing printer paper

1
Replacing printer paper
S P00 D00 006
en
|
2019-02-26