Breville VCF152X Instrucciones De Uso página 9

BEFORE FIRST USE OF THE BREVILLE BARISTA MAX +
Step 1. Remove Packaging
- Ensure all packaging has been removed.
Important: Remove the red plug found at
the base of the Water Reservoir.
Step 2. Position Machine
- Ensure the machine is positioned onto a
dry, stable, flat & horizontal benchtop.
Step 3. Wash & Dry Parts
- Do not immerse appliance, power cord
and plug in water or any other liquid.
Wash the parts listed below in warm
water with a mild detergent:
Stainless Steel Milk Jug
Stainless Steel One Cup Filter Basket
Stainless Steel Two Cup Filter Basket
Hardened Stainless Steel Top Burr
Water Reservoir
Group Handle
Bean Hopper
Tamper
- Rinse & allow thorough air drying.
Step 4. Place Accessories
- Accessories Storage Home behind
the Drip Tray for the Cleaning Brush
& Cleaning Pin. On the left is storage
space for nesting the Cleaning Disc,
One & Two Cup Filter Baskets.
- Insert the Grind Bin in the space
provided on the left side of the Drip Tray.
WIPE COFFEE GRINDS
- Place the Tamper in the detail
provided on the Warming Plate.
VCF152X_VCF153X_21MLM1 (EMEA).indd 9 VCF152X_VCF153X_21MLM1 (EMEA).indd 9
PLEASE EMPTY TRAY
Step 5. Insert Parts into the Grinder
• Removable Top Burr
- Using the two handles insert the Top
Burr into the Grinder Collar.
- The arrows on the Top Burr should
align to arrows on the Grinder Collar.
- When correctly seated, the Top Burr
will be flush with the surface of the
Grinder Collar.
TOP BURR
GRINDER
COLLAR
- Place handles down, one on each side.
• Removable Bean Hopper
- Align the Hopper Guide with the red
Grinder Interlock.
- Insert Bean Hopper into the Grinder Collar.
- Lightly pushing down, turn the Bean
Hopper in a clockwise direction to lock
the Hopper into place.
- This opens the Hopper Gates (to release
coffee beans onto the Burrs). At Grind
Setting 30, Hopper Gates are fully open.
1. ALIGN
& INSERT
HOPPER
GUIDE
GRINDER
INTERLOCK
- Continue to turn the Bean Hopper in
a clockwise direction to set the Grind
Setting.
- As a starting point for espresso extraction
try Grind Setting 20. (Further Grind
Setting adjustment might be required, see
information on pages 14-15).
- Fill the Bean Hopper with freshly
roasted coffee beans.
2.TURN
3.HOPPER GATES OPEN
9
5/14/21 15:52 5/14/21 15:52