Manitou MRT-X 2150 Privilege Plus ST3A S2 Manual De Instrucciones página 93

Tabla de contenido

Publicidad

IT
INTERRUTTORI FUNZIONI OPTIONAL
INTERRUTTORE RADIO COMANDO
e
(
, paragrafo "Interruttori" ,
INTERRUTTORE FRENO MOTORE
Il freno motore decelera il sollevatore
telescopico senza usare frizione meccanica
per evitare il surriscaldamento del sistema
frenante.
Questo freno è principalmente utilizzato
nelle lunghe discese, e permette di frenare
la macchina senza sollecitare i freni.
Premere
l'interruttore
(2,
attivare o disattivare il freno motore.
Sul pannello di controllo una spia arancione
(2a,
3.22) indica che la funzione è attiva
(e paragrafo: "Strumenti e pannello di
controllo").
Sul interruttore (2,
3.22) il led si accende
(1,
3.22) per indicare che la funzione è
attiva.
Il freno motore consente due fasi di
decelerazione (0, 1a,1b,
3.22) una bassa
ed una intensa.
Condizioni di funzionamento del freno
motore.
Il freno motore funziona solo se:
- l'acqua motore è > 60 °C
- il Pedale dell'acceleratore non è premuto
p
- i giri del motore termico sono > di 1100
rpm.
IMPORTANTE!
Per
la massima potenza frenante
del freno motore, non superare
i 42 km/h di velocità. Se
necessario rallentare la velocità
della macchina premendo il
pedale dei freni di servizio.
Se la velocità della macchina
supera i 42 km/h, il guidatore
viene avvisato da un allarme
sonoro e da una segnalazione
ottica su tachimetro "BRAKE"
(frenare).
OPTIONAL FUNCTIONS SWITCHES
RADIO CONTROL SWITCH
e
(
, paragraph "Switches" ,
3.1)
ENGINE BRAKE SWITCH
The engine brake decelerates the telehan-
dler without using mechanical friction in
order to avoid the overheating of the brake
system.
This brake is mainly used in the long de-
scents, and it allows to brake the vehicle
without stressing the brakes.
Press the switch (2,
3.22)
per
disable the engine brake.
On the control panel an (2a,
indicator light indicates that the function
is active (e paragraph: "Instrument control
panel").
On the switch (2,
(1,
3.22) comes on to indicate that the
function is active.
The engine brake allows two stages of de-
celeration (0, 1a, 1b,
intense one.
Operating conditions of the engine brake.
The engine brake only works if:
- the engine water temperature is > 60°C
- the accelerator pedal is not pressed
- the revs of the I.C. engine are > 1100
p
rpm
IMPORTANT!
maintain the braking power of
mantenere
the engine brake, the speed shall
not exceed 42 km/h. If required,
slow down the machine by
pressing the service brake pedal.
If the speed of the machine
exceeds 42 km/h, the driver will
be warned by an alarm sound
and an optical signal "BRAKE"
on the tachometer.
2a
EN
EN
INTERRUPTORES FUNCIONES
OPCIONALES
INTERRUPTOR MANDO A DISTANCIA
e
3.1)
(
INTERRUPTOR FRENO MOTOR
El freno motor desacelera el elevador
telescópico sin usar embrague mecánico,
para evitar el sobrecalentamiento del
sistema de frenado.
Este freno se utiliza principalmente en los
descensos prolongados, y permite frenar la
máquina sin esforzar los frenos.
Pulsar el interruptor (2,
3.22) to enable or
o desactivar el freno motor.
En el panel de control un testigo anaranjado
3.22) orange
(2a,
activa (y párrafo: "Instrumentos y panel de
control").
En el interruptor (2,
enciende (1,
3.22) the LED
función está activada.
El freno motor permite dos fases de
deceleración (0, 1a,1b,
otra intensa.
3.22), a low and an
Condiciones de funcionamiento del freno
motor.
El freno motor solo funciona i:
- el agua del motor es > a 60 °C
- el pedal del acelerador no está
p
- las revoluciones del motor térmico son
In
order
to
3.22
1
2
2-43
ES
ES
, párrafo "Interruptores" ,
3.22) para activar
3.22) indica que la función está
3.22) el LED se
3.22) para indicar que la
3.22), una baja y
presionado
> a 1100 rpm.
¡IMPORTANTE! Para mantener
la
máxima
potencia
frenado
del
freno
no superar los 42 km/h de
velocidad. Si fuera necesario
desacelerar la velocidad de
la
máquina
presionando
pedal de los frenos de servicio.
Si la velocidad de la máquina
supera los 42 km/h, el conductor
es advertido por una alarma
sonora y por una señalización
visual en el velocímetro "BRAKE"
(frenar).
0
1a
1b
3.1)
de
motor,
el

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mrt 2150 privilege plus st4 s2Mrt-x 2550 privilege plus st3a s2Mrt 2550 privilege plus st4 s2

Tabla de contenido