Canon PIXMA MP600R Manual De Instrucciones página 37

3
Turn on the machine.
It takes about 40 seconds until the POWER lamp
lights up green. When the computer detects the
machine, the next screen will appear automatically.
Note
If the connection is not recognized, click Help and
follow the on-screen instructions how to resolve the
problem.
4
When the Setup Preparations dialog box is
displayed, confirm that preparation is
complete, then click Next.
Note
If the machine's network settings are already
configured, the Setup Environment Confirmation
dialog box appears asking for your confirmation to use
the machine with the current settings. You can
proceed with the setup using the current network
settings. To do so, click Use it as is. To reconfigure the
network settings, click Reconfigure.
5
Select Wired LAN.
Note
If the wireless LAN settings are already configured, the
Note on Network Settings dialog box is displayed.
Generally, click Wired connection only to enable only
wired LAN.
6
When the screen shown on the right appears,
connect the machine to the network devices
such as hubs with a LAN cable and click Yes.
Then click Next.
Note
Connection may vary depending on your network
environment.
34 Setting Up the Machine and the Computer (Windows)