3
Insert the Cyan ink tank into the right-hand
slot of the Print Head, then press on the
mark on the ink tank until the ink tank snaps
firmly into place.
The ink lamp (A) lights red.
4
Use the same procedure to install the other
ink tanks into their appropriate slots.
Note
Make sure that all the ink tanks are installed in the
correct position, matching the label (A). The
machine cannot be used unless all the ink tanks are
installed.
Make sure that all the ink lamps light red.
5
Close the Inner Cover.
Note
Make sure that the Inner Cover is securely closed.
16
Preparing the Machine
(A)
(A)