Canon PIXMA MP600R Manual De Instrucciones página 57

8
Confirm that the setup program detects the machine automatically.
MP600R connected with the USB cable is detected automatically via LAN connection.
If the machine was not detected, the Set Printer IP
Address dialog box appears. Make sure that the
machine is on and connected to your computer with
a USB cable, then click Connect to retry detection.
If your machine is still not detected, see "The Set
Printer IP Address dialog box is displayed during
setup" on page 69.
9
When the screen shown on the right appears,
remove the USB cable and click OK.
The network connection between the machine and
the computer is now successfully established.
The Printer Setup Utility (Printer Center on Mac OS
X v.10.2.8) and Canon IJ Network Scanner
Selector will start up.
10
On the Printer Setup Utility (Printer Center on
Mac OS X v.10.2.8), click Add.
11
Click More Printers on the Printer Browser
dialog box.
54 Setting Up the Machine and the Computer (Macintosh)