Connecting Over Wireless Lan Via An Access Point - Canon PIXMA MP600R Manual De Instrucciones

Connecting over Wireless LAN via an Access Point

Your computer communicates with the machine via an access point (the infrastructure mode).
To share the machine among multiple computers, connect them to the access point.
Important
When using this machine over a wireless LAN, use the infrastructure mode. It does not support the ad-
hoc mode.
An access point is needed to set up the infrastructure mode. This must be purchased separately.
A wireless LAN card or adapter must be installed in your computer to connect your computer to the
wireless LAN. These must be purchased separately.
If you connect to a network that is not protected with security measures, there is a risk of disclosing data
such as your personal information to a third party.
Connects to
the Internet
Note
To connect to the Internet in a wireless LAN environment, you may use a wireless LAN access point
that has a router function as shown below. The configuration and the type of the device vary depending
on your network environment. For details, refer to your device's instruction manual or contact its
manufacturer.
Broadband
modem without
router
The machine and the router need to be in the same network.
6 Confirming Your Connection Type
The Internet
Broadband
Wireless LAN
modem with
access point
router
(without router)
The machine communicates
with your computer(s) via the
access point
Wireless LAN
Wireless LAN
access point
(with router)