Stryker PINPOINT PC9000 Manual Del Operador página 42

An overview of primary button functions on the PINPOINT camera is shown in
Figure 12.
Figure 12: Primary button functions on the PINPOINT camera (top view)
36
Focus buttons
Illumination button From Standby mode:
Press button to turn on white light illumination
With illumination turned on:
Press button to toggle between fluorescence imaging mode and
white light mode
In all modes:
Press and hold at any time to turn off all illumination and return
to Standby mode.
Display Mode / When white-light mode is active:
Menu button
Pressing button has no effect
When fluorescence imaging mode is active:
Press button to cycle through fluorescence display modes.
In all modes:
Press and hold at any time to open the PINPOINT Tools menu.
4-0002428 Rev. J
Press and hold to focus in
Short press to take a screenshot (if enabled).
Press and hold to focus out
Short press to start or pause video recording (if enabled).