Stryker PINPOINT PC9000 Manual Del Operador página 57

In Fluorescence Imaging mode, the PINPOINT System generates a parallel display
showing four simultaneous video feeds on the monitor (see Figure 23).
Figure 23: Parallel display in Fluorescence Imaging mode
1. White-light mode
2. SPY mode
3. Overlay mode
Note: For fluorescence imaging using the Overlay display mode, ensure that a
fluorescence imaging laparoscope is used. Attempting to use Overlay mode with
any other laparoscope, including NOVADAQ white-light imaging laparoscopes, will
produce an image in which the video screen is flooded with fluorescence signal,
obscuring the white light image.
While Fluorescence Imaging mode is active, up to three different display modes
are available:
▪ Overlay mode – see Figure 24
▪ SPY Color-Segmented Fluorescence (CSF) mode – see Figure 25
▪ SPY mode – see Figure 26
PINPOINT Endoscopic Fluorescence Imaging System Operator's Manual
4. Main display in Overlay mode (current display
mode icon shown in the top corner of the screen)
5. Parallel display (3 smaller simultaneous video
images)
51