Stryker PINPOINT PC9000 Manual Del Operador página 60

The PINPOINT System enables the operator to toggle between Fluorescence
Imaging mode and White-light mode at any time during an imaging procedure. The
parallel display option is not available in White-light mode.
To toggle between Fluorescence Imaging mode and White-light mode:
Figure 28: White-light mode icon
54
On the PINPOINT camera, press the Illumination button
The White-light mode icon displays in the top right corner of the screen (see
Figure 28).
In White-light mode, press the Illumination button
Fluorescence Imaging mode.
4-0002428 Rev. J
.
again to return to